双螺杆泵吉林森德HWL5-4W2

使用微信扫描二维码分享朋友圈，成交更快更简单！

双螺杆泵 吉林森德HWL5-4W2网上找螺杆泵很纠结？真假难辨？价格没底？——找杜工不纠结,专注螺杆泵15年,手机,邮箱hstrby@126.com,hstrby,
Product Introduction
Three Screw Pump Application
It applies to deliver lubricating medium,such as oil ,bitumen, withthe viscosity of 3-760cSt at temperature below 350°C
The pump’s working pressure range from 0.6Mpa to 2.5Mpa
Flow rate range from 0.6m3/h to123 m3/h.
The are mainly suited to fuel delivering, hydraulic engineering,shiping engineering, petrochemical and other industry fields.
Standar seal:Mechanical seal,packing seal is available
Direction:CW seem from motor side
Three Screw Pump Feature
(1) Medium is delivered continuously without agitation andpulsation.
(2) Small vibration and low noise.
(3) High pressure and high efficiency.
(4) Simple structure and easy assemble
(5) Small volume and light weight
(6) Wearable and long life
Technology Parameters
Working Principle: Three Screw (One main, two driven screws)
Main applications: Heavy Oil, bitumen
Driver: Electric motor, diesel motor.
Power Specs: 380/415V 3phase;50hz/60hz
Max.permissible fluid temperature: 200°C(392°F)/350°C(662°F),Heat insulation
Type of connection: Flange, Thread, Quick Coupled.
Installation position: Horizontal
Casing/Inner parts material: Cast iron, Stainless Steel/Cast iron, Stainless steel, Bronze
Shaft seal type: Mechanical seal
Free passage: 00 mm
Maximum viscosity: 2.5X103C.S.T/3X106C.S.T(Heat insulation)
Maximum drive rating: 90KW(120HP)
Maximum caliber: 200mm(8inch)-in/150mm(6inch)-out
Maximum discharge-side pressure: 6MPa(60bar)
Flow rate range: 0.2-94m3/h(0.88-413.6US.GPM)

双螺杆泵 吉林森德HWL5-4W2----实实在在的价格，准准确确的交付时间，完备的售后服务，这几点只有生产企业才能做到的，请您上网找供应商的时候仔细甄别。
由于我司产品型号太多，本页无法全部展示 请联系我们获取全的产品型号和介绍
上述图片仅供参考，详细型号请咨询我们，更多型号请访问我们的官网 或致电（；）我们了解